Sampler

Sampler

$729.00

  • (Leave Empty to leave it up to the shaper)
  • Select Board Length
  • NOT AVAILABLE FOR EXPRESS OR PREMIUM
  • XTR GLASSING AND DURABILITY
    FIBERGLASS BOTTOM TOP APROX.
    WEIGHT
    RECOMMENDED
    FOR
    DURABILITY
    COMPARE TO POLY
     
    7.C
    TEAM
    4 oz. 4 oz. + 3/4 4oz . Under 5 lbs. Full performance Will last 30 to 50% more
     
    7.C 4 oz. 4 oz. + 4 OZ. "S" glass Under 6 lbs. Performance Will last 50 to 100% more
     
    7.0 4 oz.
    or 6 oz.
    4 oz. + 6 oz. Under 6.5 lbs. Great Durability Double than poly
    (no dents)
     
     
    Tip: You can combine Construction with Durability, (the logo will be from XTR construction)
     

Product Description

Take your good wave game to conditions that are not. The Sampler was developed with Dane Reynolds to be that step-down board you ride a little shorter and wider in smaller or weaker surf while not sacrificing performance. It fits in your quiver between something fishy like a High 5 or Pod Mod and your normal shortboard.

Loosely based off the Dumpster Diver,it has flat, racy entry and center rocker,with ample curve out the tail for tight transitions and airs. A generous single concave runs the whole length of the board, with a slight double within the single between the fins, and just a little vee to provide kick off the tail. The outline is full but sleek in the front half, with an exaggerated and slightly forward of normal Merrick hip, and a wide old-school squash tail.

The Sampler is suitable for every level of surfer and should be ordered 2-4 inches shorter, 1/4 to 3/4 inches wider, and the same or slightly thicker than your normal shortboard.

Reviews

There are no reviews yet.

Be the first to review “Sampler”

Your email address will not be published. Required fields are marked *